Configurable Lock Settings
Every lock has configurable settings that can be adjusted by using the SDK. These settings vary by lock model.
Models
- 4400: Indoor Padlock & 4401: Outdoor Padlock
- 5440: Portable Lock Box & 5441: Wall Mount Lock Box
- 6440: Door Controller
- 6440: ProSeries
- D1000: Deadbolt
Counters
Relock Delay
The relock delay is the number of seconds that will pass before a lock will automatically relock if the shackle/door is not opened.
The Deadbolt is the only model that does not have this setting since it has an explicit relock command in order to lock the bolt.
Primary Code
The primary code is the main manual entry code. This code is used by entering the numbers/directions in the keypad, and it does not need a phone to be present. There is only one primary code.
When a primary code is used, an audit event is stored.
The Door Controller does not have a keypad. Therefore, it does not have any primary codes.
Secondary Code
Secondary codes are available for manual entry on certain lock models. Like the primary code, it is used by entering the numbers/directions in the keypad, and it does not need a phone to be present.
When a secondary code is used, an audit event is stored to indicate which one was used and when.
The Door Controller does not have a keypad. Therefore, it does not have any secondary codes.
Temporary Code
See discussion on Temporary Code.